Natural Functional Odor Elimination

From box to fresh air
in 5 steps

🔊 Hover any video — it plays with voice-over
🔊 playing
Intro

Everywhere you grow

Home grow to pro facility, drying room to coffee shop — one diffuser handles the odor. This is Niodor.

🔊 playing
Step 1

Unbox & Unwrap

Open the box, take everything out and unwrap the diffuser — bottle, cable and adapter included.

🔊 playing
Step 2

Mounting the diffuser

Peel the foil off the adhesive pad, stick it onto a dry, clean surface at the height you want, and hang the diffuser on.

🔊 playing
Step 3

Filling the bottle

Get the oil ready and fill the bottle slowly — use the funnel, if you have one.

⚠️ Always keep the oil bottle upright — tilted, oil leaks out of the nozzle.
🔊 playing
Step 4

Activate the diffuser

Plug in the adapter and connect the cable — the first fragrant mist arrives right on schedule.

🔊 playing
App

Install & connect

Install Aroma-Link, pair your diffuser over Bluetooth, and give each device its own name.

🔊 playing
App

Set up for a grow room

Run it around the clock, then step the pause down until no cannabis odor is detectable.

💡 Recommended settings: start at 5 s on / 900 s pause, then wait 30 minutes. Odor still noticeable? Reduce the pause by 30 s at a time — down to 2 minutes at most. Still there? Raise the on-time in 1-second steps until no cannabis odor is detectable.
🔊 playing
App

Set up for a home

A living room or a bedroom needs a gentler rhythm — start at 300 seconds and tune from there.

💡 Recommended settings: start at 5 s on / 300 s pause for a living room or a bedroom. Odor still noticeable? Reduce the pause by 5 s at a time — down to 2 minutes at most. Still there? Raise the on-time in 1-second steps until no cannabis odor is detectable.
🔊 playing
Placement

Stick it, hang it — place it right

Lace a string under the mount and hang Niodor above the canopy, opposite the extraction fan — or outside, right by the extractor's outlet.

🔊 playing
Care

Keep it upright

The oil bottle only ever travels standing up. Tip it with oil inside and it runs straight out of the nozzle.

🔊 playing
Care

Cleaning the nozzle

Left unused, the nozzle can clog. Soak both nebulizer parts in 99% isopropyl alcohol for 10–15 minutes, dry them, and nebulize 10 ml of clean alcohol through the device.

🔊 playing
Care

Factory reset

Bluetooth playing up? Remove the device from your phone, then run a factory reset: press and hold MODE and SET until it restarts — it comes back with the default settings.

🔇 Click anywhere once to enable sound